Slitter Rewinder Machine
Machine Description
Schematic Diagram
Nonwoven Slitting Procedure
Paper pipe cutting -> Put on rewinding air shaft equably -> Raw material autofolding -> Automatic correct deviation -> Slitting -> Rewinding -> Collection
Fabric Samples
Machine Characteristics
Product features
This set of machine can automatically load raw materials and cut non-woven fabrics into different widths roll by roll. It is a special machine for cutting non-woven fabrics.
Configuration: 30 sets of blades, replaceable and adjustable:
Slitting width: 25mm;
Equipped with automatic deviation correction system and magnetic tension controller.
Powerful feeding and bag making functions
Machine Technical Data
SN | Item | Specification |
1 | Roller width | 25-1800mm |
2 | Slitting speed | 30-80m/min |
3 | Min slitting width | 25mm |
4 | Power supply | 220V 50Hz |
5 | Total power | 3KW |
6 | Rated power | 3KW |
7 | Overall size | L 2400* W 1800* H 950mm |
8 | Weight of Machine | 650KGS (20HQ*1) |
Main Equipment and Description
SN | Item | Specification | Picture |
1 | Feeding Unit |
| |
2 | Rewinding Unit |
| |
3 | Roll feeding | Auto tension control, centralization- |
|
4 | Roll diameter | 1000mm |
|
5 | Roller control device | φ3″（φ76mm）Air Shaft |
|
6 | Roller control device | Mangentic power tension |
|
7 | Correcting deviation device | Automatica EPC syestem |
|
8 | Converter Motor |
| |
9 | Knife |
|
Facilities (Buyer prepare)
Electric: Single phase220V±10%50HZ
Air: 0.75Mpa
After sales service Q & A
Q: How to install the equipment？
A:Due the corona breakout in global, the seller would not arrange engineer outside to install, all the service would change to online service.
Q: If the corona finished,how to install? And how long it will last？
A:The seller will send 1 engineer to install, test the machine and train customers’ workers in buyers’ factory. It will take about 1 week for the entire installation and training.
Q: What are the additional costs of installation？
A:The buyer should cover engineers’ salary, visa cost, Round air tickets, accommodations, transportation in buyers’ country, food, medical care, safety cost, and related cost happens in buyers’ country. Also, the buyer should prepare enough labor, electric wire outside the control panel and tools for installations.
Q: Who pay for the Engineer’s Salary？And how much？
A:The buyer pay for the Engineer’s Salary.It's USD 80/day, depending on how the engineer make you satisfied. The date he arrives and leaves shall be counted as paid day.
Q: What are the product warranty service terms?
A:Warranty period for the delivered equipment will be 12month after completion of erection but not later than 18months after shipment. In case any item proves to be defective and the damage is confirmed by seller’s technicians within this period, the seller will at their choice either send engineer to repair or supply a new one for replacement free of charge on the basis of CNF delivery.
Note：The above item does not include the parts, which have regular spares or the parts damaged from normal wear, abnormal operation, improper maintenance and inadequate civil works. The seller is not liable for any production loss under any circumstances.
Q: How about the Packing condition about the equipment？
A: As per export standard, they will also be treated before delivery against damage and rusting.
The role of a roll slitting machine
The mechanism used for the slitting process is often referred to as a roll slitting machine, slitter, a slitting machine or a slitter rewinder. To put things simply, the main role of a slitting machine is to convert (slit) papers, film and foil materials so that large rolls of these materials can be cut into narrower rolls.
A roll slitting machine consists of three main parts; the unwind, the slitter and the rewind. By feeding a large roll of your chosen material through the slitter’s unwind, your material will then unwind and be slit into various widths, before being rewound into cores of various widths.
What are the working principles of slitter rewinder machine？
1. The slitter rewinder machine is used to cut and process the whole roll or the whole raw material into fixed length sections, such as plastic packaging materials, packaging cartons, steel plates, films, leather, cutting sawdust, and cutting control.
2. The slitting length can be set continuously, if the actual length of the cutting error, it is convenient to set the calibration method of the parameters.
3.Slitter rewinder machine slitting control is divided into two kinds of static and dynamic cutting: set the length to reach precise stop, then perform static cutting, cut and restart; do not stop during dynamic dynamic cutting within the set arrival time Problems with cutting signals, slitters in the material.
Advantages of slitter rewinder machine structure
1. The front end of the main shaft is fixed on the base with a set of bearings, and the pulley is installed in the middle of a set of bearings; the compression cylinder is installed near the base, and the cylinder is supported by the cylinder. A set of support rod bearings are installed on the upper end of the rod to support the main shaft.
2. Multiple blades are arranged on the upper end of the slitter rewinder, and are arranged on multiple blades with a certain gap; the support of the main tool shaft is erected on the top of the slitter rewinder, in the cylinder in the middle of the installation.
3. The structural advantages of the slitter rewinder machine fill the gaps of the automatic pipe cutting machine.
Wholesale slitter rewinder machine with factory price. Contact us right away for more information about slitter rewinder machine. We are roll slitting machine manufacturer in china. We can be perfect suppler for your business.
Why choose us?
- We are a trustworthy supplier and manufacturer of Roll To Roll slitting machines.
- We strive to pursue the sustainable development of the enterprise with an enterprising spirit.
- We provide a competitive lead time for manufacturing and delivery of our Roll To Roll slitting machines.
- We are a comprehensive, scientific and technological enterprise integrating R & D and production. With our strong manufacturing partners capabilities, we create a 'One Stop' solution for our customers.
- Our Roll To Roll slitting machines are built to last.
- Years of dedicated management and adjustment have enabled us to achieve leapfrog development.
- Our Roll To Roll slitting machines are not only high-quality but also affordable.
- The company has established four core competitiveness with independent innovation as the core, brand channel advantages, talent management team advantages and quality control advantages.
- Our factory has a strong R&D team that focuses on continuous product improvement.
- Since its establishment, our company has been committed to becoming a consultant for companies or individuals in the Slitter Rewinder Machine industry. We hope to not only provide products that meet the needs of consumers but also help entrepreneurs or customers who have just set foot in this field or have already been involved in this field to better understand this industry.
Hot Tags: slitter rewinder machine, China slitter rewinder machine manufacturers, suppliers, factory, used slitter rewinder machine for sale, used non woven fabric slitting machine, automatic slitter rewinder machine, computer sliting machine, roll slitting machine, Foil Slitter
