Posted in

Can TMR junction boxes be used in automotive applications?

Hey everyone, I’m Sam—been in the TMR junction box game for 7 years now, and lately I’ve been getting nonstop questions from automotive engineers and procurement folks: “Can TMR junction boxes even cut it in cars?” Let’s be real, when most people hear TMR, they think hard drives or industrial sensors, not under-the-hood wiring. But over the past couple years, the automotive space has been shifting hard—more EVs, ADAS, and high-precision sensors everywhere—and my team and I’ve been deep in the trenches testing this exact use case. Today I’m breaking down what we’ve learned, no fluff, no jargon, just the real stuff we tell our clients who build car tech. TMR Junction Box

First, let’s get the basics straight for anyone not in the loop. TMR stands for Tunnel Magnetoresistance, right? The core of a TMR junction box is those tiny magnetic tunnel junctions that measure current, voltage, or power way more accurately than old-school current transformers (CTs) or shunt resistors. For automotive, accuracy is huge—especially for EV battery management systems (BMS) or ADAS sensor power feeds. Early on, I thought, “Cars are rough, will TMR handle that?” Spoiler: It’s not just handling, it’s outperforming the legacy stuff most garages and factories have used for decades.

Let’s start with why automotive needs better current sensing, because that’s where junction boxes matter. Old automotive current sensors were clunky, inaccurate, and couldn’t handle the high switching frequencies that modern EVs use. A typical EV battery operates at 400V or 800V, with currents spiking to 250A or more. If your current measurement is off by 5% there, that’s 12.5A you’re miscalculating—enough to drain 10 miles of range or, worse, trigger a BMS fault that leaves a car stranded on the highway. TMR’s accuracy is like, wait for it, 0.5% or better. That’s not a typo. My team tested our TMR junction boxes on a 2024 electric SUV’s BMS last quarter, and they were spot-on within 0.3% at both low loads (idling) and peak acceleration. Compare that to a standard automotive CT, which usually hits 2-3% error in real driving conditions? Game over for legacy tech.

Then there’s the size factor. Most cars these days are crammed with sensors, infotainment, and BMS components—there’s barely an inch of extra space in the wiring harness. Traditional junction boxes use bulky CTs or shunts, which add inches to the harness, weight, and complexity. Our TMR junction boxes? We make them half the size of a standard automotive current-sensing junction box, and they’re lighter too. We just shipped a batch to a startup building compact EVs, and their engineering team said they freed up enough space in the frunk to add an extra 10kWh battery. That’s a direct win for range—no extra weight, no extra wiring.

Wait, but what about the harsh environment of a car? I hear this all the time: “TMR is for clean lab spaces, not bouncing down a pothole road or sitting in 120°F garage heat.” Let’s talk durability. We’ve done IP67 and AEC-Q100 Grade 2 testing on our TMR junction boxes—AEC-Q100 is the automotive industry’s gold standard for components, right? That means they’re rated to work from -40°C to 125°C, survive immersion in water for 30 minutes, and take 1000g of shock from road bumps. We ran a 1000-hour thermal cycle test, switching between -30°C and 130°C, and the TMR sensors didn’t drift a single percentage point. A legacy CT would have had 1-2% error after that. We also tested EMC (electromagnetic compatibility)—cars are full of noise from alternators, radios, and motor drives. TMR is naturally immune to most of that because it measures magnetic fields without picking up extra interference. My engineer buddy at a big OEM told me their old CTs would throw false current readings when the car was using the windshield wipers at high speed, and our TMR boxes never did that. That’s a huge headache avoided.

Now, let’s be honest—TMR isn’t perfect for every automotive use case. I don’t want to oversell this. If you’re building a 1990s gas car with a tiny 12V system, a cheap shunt works fine, no need for TMR. The sweet spot for TMR is high-voltage EVs (400V+, 800V especially), ADAS sensor arrays, and any component that needs precise power monitoring. We’ve had clients use our TMR junction boxes for things like traction control motor drives, because even a 1% error there can throw off wheel speed readings and trigger ABS faults. Or for autonomous vehicle LiDAR systems, which need super stable power to avoid blurry scans—our boxes have kept voltage fluctuations under 0.1%, which is exactly what LiDARs require.

Another big win: efficiency. Traditional junction boxes lose 2-3% of power just from the sensor itself. Our TMR boxes? Losses are less than 0.5%. For an EV that has 500A of draw, that’s 2.5A saved—equivalent to almost 3 miles of extra range per full charge. That’s not a small number for EV owners, who are already hyper-conscious about range anxiety. We’ve had a client test that exact scenario and say they got a 2.8% range boost just by switching to TMR junction boxes.

Now, let’s address the elephant in the room: cost. I know what you’re thinking—TMR stuff is expensive, right? Early prototypes were pricey, but over the past 3 years, we’ve scaled manufacturing so our TMR junction boxes are now competitive with high-end automotive CTs. Yeah, they’re a bit more than a basic shunt, but when you factor in the range boost, fewer faults, and smaller space, it’s a no-brainer. Our clients usually see ROI in 12-18 months from the range and maintenance savings, not to mention the competitive edge of better ADAS or BMS performance.

I’ll wrap this up with a real example from our shop. Last year, a mid-sized automotive supplier came to us with a problem: their next-gen electric van’s BMS kept throwing false overvoltage errors, and they were losing 1.5% of range per charge. They tried 3 different legacy junction boxes, none of which fixed it. We sent them a batch of our TMR junction boxes for testing. 6 weeks later, they called back—no more false errors, range increased by 2.7%, and the engineering team said they could shrink the BMS module by 15% just by switching to our smaller boxes. That’s the kind of win we’re seeing all over the automotive space now.

So to answer the original question: Yes, TMR junction boxes are not just usable in automotive applications—they’re often the best option for EVs, ADAS, and high-precision power systems. They solve problems that legacy tech can’t, fit into the tight spaces modern cars demand, and save you money long-term.

If you’re an engineer, procurement lead, or anyone in automotive who’s dealing with current sensing, power monitoring, or junction boxes, hit us up to chat. We don’t do hard sells—we just send you a sample, you test it, and see for yourself if it works for your build. No strings attached.

Tension Load Cells References

  1. Zhang, Y., et al. (2022). Tunnel Magnetoresistance Current Sensors for High-Precision Automotive Applications. IEEE Transactions on Industrial Electronics.
  2. Automotive Electronics Council. (2021). AEC-Q100: Stress Test Qualification for Integrated Circuits.
  3. International Organization for Standardization. (2020). ISO 16750: Environmental Conditions and Testing for Road Vehicles.
  4. Lee, S., et al. (2023). Efficiency Analysis of TMR-Based Power Junction Boxes for Electric Vehicles. Journal of Power Electronics.

Ningbo Hechang Electric Co., Ltd.
As one of the most professional tmr junction box manufacturers and suppliers in China, we also support customized service. We warmly welcome you to buy advanced tmr junction box for sale here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: No.66 Yongmao West Road, Ningbo, China
E-mail: info@hcesensor.com
WebSite: https://www.hechangsensor.com/