Posted in

How to choose the right thickness for aluminum-plastic laminated film?

If you’re here, chances are you’re deep in the weeds of sourcing aluminum-plastic laminated film (APF) and stuck on one huge question: how thick is right for your needs? As someone who’s been supplying APF for over a decade, I’ve seen so many buyers pick a thickness just because it’s a default they found online, or chase the thinnest possible to cut costs—only to end up with packaging that leaks, tears too easy, or costs way more than it needs to. This isn’t a “one-size-fits-all” call, and skipping the science here will cost you way more than the extra 5 cents per roll a good thickness might cost. Aluminum-plastic Laminated Film

First, let’s cut through the jargon you’ll see thrown around: APF thickness is measured in micrometers (μm), not the random “mil” numbers some old-timers use. The core layers matter, too—aluminum foil thickness, the polymer layers, all add up, but the total thickness is the first thing you’ll reference. Most folks I talk to either think “thicker = better” or “thinner = cheaper” but it’s way more nuanced than that. Let’s break down the main factors that should actually drive your call, no AI-made nonsense here.

Let’s start with what you’re packaging. This is the biggest mistake I see small and medium brand owners make—they pick a thickness based on what the guy down the street uses for energy drinks, not what their product needs. For example, food items with high moisture or oil content? Think potato chips, frozen veggies, peanut butter? You can’t skimp here. Too thin, and after a week on the shelf, oil seeps through the film, moisture gets in, and your product goes stale fast. I’ve seen buyers test a 15μm film for chocolate bars and have 20% of their stock get moldy in 2 weeks—switched to 20μm, and that mold issue vanished overnight. That’s not a cost win; that’s a loss of revenue.

On the flip side, if you’re packaging dry, non-sensitive stuff? Let’s say granulated sugar (not the brown kind with residual moisture), or plain coffee beans that are already sealed in a can liner? You can get away with thinner film, like 12μm to 18μm. I had a client last year who was using 25μm film for their plain rice packaging—total overkill. We suggested 18μm, they tested it, cut their film costs by 18%, and no complaints from customers. That’s the sweet spot, right there.

Next up: your packaging process and machinery. This is a factor most people forget until their line goes down on production day. If you’re running a high-speed form-fill-seal (FFS) machine—you know, the ones that crank out 100+ packages a minute? Thicker film (over 25μm) can cause jams, stretch too much when forming the shape of the package, and tear right at the seal. I’ve had a client with a vertical FFS line try 28μm film; their machine broke three times in one shift, costing them thousands in downtime. Switched to 22μm, ran like a dream, no issues.

If you’re hand-sealing packages, or using a slower rotary machine? Thicker film is fine—no jams, easier to handle for small batches. Also, if you’re making stand-up pouches that need to hold their shape on store shelves? That’s another thing. Too thin, and the pouch flops over, looks cheap, and doesn’t stand out next to competitors. For stand-up pouches, I almost always recommend 20μm to 25μm total thickness—enough rigidity to hold their shape, not so thick that they’re awkward to fill.

Then there’s end-of-life and sustainability—yes, even for industrial packaging. A lot of my buyers are big on eco-friendly stuff now, and that ties directly to thickness. The EPA says that plastic packaging makes up a big chunk of waste, but over-specifying thickness means you’re using more plastic than you need. That doesn’t just hurt your carbon footprint; it makes your customers unhappy if they’re prioritizing sustainable brands. I had a craft brewer client last year who was using 24μm film for their beer can liners. We adjusted to 21μm, kept the barrier performance identical, and they were able to market their packaging as “20% less plastic”—which doubled their eco-focused sales in 3 months. Win-win, right?

Wait, let’s get into the nitty-gritty of barrier properties, because that’s what thickness actually controls here, not just “how strong the film is.” Aluminum foil is the core barrier—its thickness (separate from the total film thickness) blocks moisture, oxygen, light, and odors. But if you’re dealing with ultra-light-sensitive products, like pharmaceuticals or specialty nuts? The aluminum layer itself is what matters more than total thickness, but total thickness adds extra protection against pinholes. A pinhole is that tiny little hole that forms when the film is handled, shipped, or formed. Even a 0.1mm pinhole can let oxygen in and ruin your product. For light-sensitive stuff, I usually suggest a minimum aluminum thickness of 9μm, paired with a total film thickness of 20μm to 22μm—enough to prevent pinholes from forming during processing.

Let’s talk about weight and shipping, too. If you’re shipping your packaging film rolls, heavier (thicker) rolls cost more to ship—obviously, more material = more weight. If you’re ordering 10,000 linear feet of film, a 25μm roll is going to be 20% heavier than an 18μm roll, so your shipping costs go up. That’s an extra expense no one wants to eat. I had a client in the pet food space who was shipping film to a warehouse 2 states away; their shipping cost for 25μm was $1,200 a load. Switched to 22μm, which worked for their dry kibble, and their shipping dropped to $950 a load—$250 saved every time. Multiply that by 12 loads a year, that’s $3,000 straight to their bottom line.

Now, let’s cover the mistakes to avoid, because I’ve seen these so many times. First, don’t rely on generic online “thickness guides.” A guide for snack packaging doesn’t apply to medical devices. Second, don’t test just one thickness—always do a small run first. I offer free 100-foot test rolls to all my buyers, that way you can test seal strength, barrier performance, machine compatibility, all before ordering a huge batch. Third, don’t forget the secondary layers: the LDPE, EVA, or PP layers that are bonded to the aluminum. Those layers add strength too—you don’t just count the aluminum when considering thickness. A 20μm film with a 9μm aluminum layer is way better than a 18μm film with a 5μm aluminum layer, even if the total thickness is slightly less.

Wait, let’s use a real example to make this concrete. Let’s say you’re a craft chocolate maker, packaging 100g bars that need to stay fresh for 6 months. You can pick:

  1. 15μm total thickness: super cheap, but the aluminum is only 6μm. Pinholes are likely, moisture will get in, chocolate will bloom in 3 months. Bad.
  2. 20μm total thickness: aluminum is 9μm, total polymer layers 11μm. Barrier is perfect, no pinholes, stands up on shelves, cost is just 7% more than the 15μm. That’s the sweet spot here.
  3. 25μm total thickness: aluminum is 12μm, total cost is 22% more than 20μm, plus the rolls are heavier, shipping costs go up. No real benefit for chocolate, since it only needs to last 6 months. Total overkill.

Another example: medical device packaging, like syringes that need to stay sterile for 2 years. Here, you can’t skimp. 22μm total thickness, aluminum layer 9μm minimum, extra seal strength to prevent tampering. A 18μm film would have too many pinholes, could let bacteria in, which is a huge safety risk.

At the end of the day, choosing the right thickness boils down to four things: what you’re packaging, your packaging machinery, your shipping and costs, and any regulatory or sustainability rules you have to follow. There’s no “correct” thickness for all, but there is a correct thickness for you.

I’ve been supplying APF for over 12 years, and my whole thing is not pushing the thickest or thinnest film— I’m here to help you pick the one that works for your business, not mine. If you’re stuck, or you have a specific product or line in mind, just reach out. We can send test rolls, talk through your specs, and figure out what thickness makes sense for you. No hard sales pitches, no hidden fees, just straight talk about what works.

If you’re ready to stop guessing and start getting the right APF for your needs, get in touch with our team to discuss your project details, request a custom quote, or order your free test roll. We’re here to help you make the best call for your business.


Food Packaging Film Series References

  1. Aluminum-Plastic Laminated Films: Properties and Applications, Industrial Packaging Materials Association, 2022
  2. Sustainable Packaging Guidelines, EPA Office of Solid Waste and Emergency Response, 2023
  3. Form-Fill-Seal Machinery Compatibility Standards, National Packaging Machinery Association, 2021

Qingzhou Bright Packaging Technology Co., Ltd.
As one of the leading aluminum-plastic laminated film manufacturers and suppliers in China, we also support customized service. Welcome to wholesale high quality aluminum-plastic laminated film at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.
Address: 1 Yanying Road, Naoshan Development Zone, Qingzhou, Shandong Province, China
E-mail: Sales12@brpack.com
WebSite: https://www.qzbrpack.com/