Posted in

how to hem a baseball jersey

If you’ve ever picked up a baseball jersey that fit perfectly everywhere except the tail hanging way past your waist, or bought a retro game jersey that feels too long in the arms to wear comfortably during batting practice, you know how annoying it is to have something great ruined by a hem that’s just off. As a baseball jersey supplier who works with teams, clubs, and individual players all the time, I’ve seen way too many people either botch a hem attempt and ruin a perfectly good jersey, or shell out way too much money to get it done at a tailor. The good news? Hemming a baseball jersey is way simpler than it looks, and you can do it at home in an afternoon with stuff most people already have in their craft closet. Baseball Jersey

First, let’s get one thing straight: baseball jerseys aren’t like regular t-shirts. They’re usually made of a sturdier polyester blend (or even heavier cotton for vintage styles) that doesn’t stretch like a soft tee, but the hem is usually a double-stitched seam that’s built to hold up during games. Messing up that seam means you could end up with fraying, or even worse, a hem that comes undone mid-inning when you’re diving for a ground ball. That’s why I don’t recommend just grabbing fabric scissors and chopping off extra length without a plan—trust me, I’ve seen that mistake more times than I can count.

Let’s start with prep work, because rushing this part is where most people go wrong. First, you need to try the jersey on properly—no, holding it up to your body won’t cut it. Put on the undershirt you’ll actually wear under the jersey, stand up straight, and pull the jersey down so it hits exactly where you want it to. For most players, that’s just above the hip bones, so the hem doesn’t get caught in your pants when you’re running the bases. Have a friend help you mark the perfect length with a washable fabric marker (or even a piece of masking tape pressed to the inside of the hem—just make sure it doesn’t leave a sticky residue) all the way around. Don’t just mark one spot; move the tape or marker an inch to the left, right, front, and back, to make sure the hem is straight—no one wants a jersey that’s an inch shorter on one side.

Next, take the jersey off and lay it flat on a hard surface, like a dining room table or a cutting board. Now, here’s a pro tip from someone who’s worked with hundreds of baseball jerseys: don’t cut the hem straight yet. Baseball jerseys have a thick double hem (that’s the factory stitch that holds the bottom edge together) that’s meant to be turned up, not just chopped. If you cut the bottom edge, you’ll be left with a raw edge that’s way more likely to fray, especially if you’re playing in hot, humid weather. Instead, measure how much extra fabric you have below your mark. Let’s say you marked your hem at 28 inches from the top shoulder seam, and the current hem is at 30 inches—so you have 2 inches of extra length. You’ll want to cut off the bottom double hem first: use your seam ripper to carefully unpick the factory stitches along the entire bottom edge. That will leave you with a clean, flat edge of fabric that’s easy to work with.

Wait, if you don’t have a seam ripper? No problem—you can use a small pair of sharp scissors, just be super careful not to snip the main fabric. But a seam ripper is like $5 at any craft store, and it’s worth it. Once the factory hem is unpicked, fold the bottom edge up to your marked length, and press it flat with an iron. This is key: heat sets the fold, so the hem won’t shift while you’re sewing. Use a low to medium heat setting (no steam, unless your fabric label says it’s okay) and press the fold for 5-10 seconds all the way around, so it’s a sharp, even line. Some people like to fold it over twice, just like the factory does, for extra durability—and that’s a great call for a jersey that’s going to see a lot of action. The second fold is just half an inch, so total extra length you’ll fold up is 1 inch if you wanted to take it in 2 inches, for example.

Now, sewing. You don’t need a fancy industrial sewing machine for this—a basic home machine works totally fine. Use a polyester thread, same color as the jersey if you can, or a white or black thread that blends in if you can’t find an exact match. The factory uses a straight stitch, and that’s all you need—no fancy zig-zag or overlock stitch. Set your machine to a straight stitch with a medium length (around 2.5-3mm) so the stitches are strong but not too tight. When you’re sewing, start a few inches from the side seam, backstitch 2-3 stitches to lock the thread in, then sew slowly along the folded hem, keeping the edge of the foot aligned with the fold. Don’t pull the fabric as you sew—let it feed through the machine on its own, because polyester can stretch if you tug it. Once you get back to where you started, backstitch again to secure the thread, and cut the loose ends.

If you don’t have a sewing machine? No worries—you can do this by hand, and it’ll still hold up for casual wear or even rec league games. Use a heavy-duty needle (size 14 or 16) and polyester thread, and do a simple running stitch, or a backstitch, which is stronger. The backstitch is just making a stitch forward, then a stitch back, so each new stitch overlaps the last one—this is the same stitch the factory uses, so it’s super durable. You’ll want to take your time here, though, because hand-stitching a hem around a whole jersey can take 30-45 minutes.

Now, a few common mistakes to avoid, because I’ve seen all of these ruin jerseys: First, don’t hem it too short. I once had a customer bring in a custom game jersey he’d hemmed himself to fit his 10-year-old son, and it was so short it rode up his back when he swung a bat. He ended up having to buy a new jersey from us because the hem was too narrow to fix without ruining the print on the back. Second, don’t skip pressing the hem. If you just fold it and sew it without ironing, the fold will be uneven, and the hem will look messy. Third, don’t use regular cotton thread for a polyester jersey—it will break easily, especially when you’re bending or stretching. Polyester thread is cheap, so just spring for that.

What if you have a jersey with numbers or a logo at the bottom? Wait, no—most baseball jerseys have the hem above the numbers, so if the numbers are going all the way to the bottom, that’s a custom jersey, and you might need to be a little more careful. If that’s the case, mark your hem carefully so you don’t cut into the number print, and use a lighter touch when cutting. If you do accidentally snip a number, you can touch it up with fabric paint, but that’s a bit of a last resort.

Now, let’s talk about when you might want to just leave it to a pro. If it’s a vintage jersey, or a custom pro-style jersey with detailed stitching, it might be worth paying a tailor $10-$15 to do it right, especially if you don’t want to risk ruining something valuable. But for most casual jerseys, the home method works great.

As a baseball jersey supplier, I get that a lot of you are out there playing rec ball, coaching a youth team, or just loving the retro vibe of a 90s jersey, and you want it to fit perfectly without breaking the bank. Hemming it yourself is a skill that’ll come in handy for other clothes too—like t-shirts, hoodies, even shorts. But if you’re in the market for a new jersey, or want custom jerseys for your team, we’ve got you covered. We carry a huge range of sizes, styles, and colors, from basic teal jerseys for a local travel team to vintage-style jerseys with retro numbers, all made with the same durable fabric I talked about earlier. Whether you need 10 jerseys for a Little League team, or a custom jersey for a weekend pickup game, we can work with you to get the fit and look you want. No need to settle for a jersey that’s too long and awkward—we can help you get something that fits exactly how you want it, whether you hem it yourself or work with us to get the right size from the start.

Baseball Jersey If you have questions about hem tips, need help picking the right jersey for your team, or want to chat about bulk orders, reach out to our team and we’ll walk you through everything. We’re all baseball fans too, so we get how important it is to have gear that works as hard as you do. No more awkward hems, no more wasted money on jerseys that don’t fit—just good gear for the diamond.

References

  1. "Guide to Hemming Athletic Apparel" – National Sewing Circle, 2022
  2. "Durable Stitching for Polyester Sportswear" – Athletic Apparel Manufacturers Association, 2021
  3. "Baseball Jersey Fit Guidelines" – USA Baseball, 2023
  4. "Home Sewing Tips for Sportswear" – Craft & Sewing Blog, 2024

Yiwu Danas Import & Export Co., Ltd.
As one of the most professional baseball jersey manufacturers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to wholesale customized baseball jersey at competitive price from our factory. Welcome to contact us for free sample.
Address: 5F, Building 3, NO.121 Qiushi Road, Beiyuan Street, Yiwu City, Jinhua, Zhejiang, CN(China)
E-mail: ywdanas222@126.com
WebSite: https://www.ywdanas.com/